Locksmith in InnisfilDeadbolts installed
the right way
A deadbolt is only as strong as the hole it was bored into and the plate it throws into. In Innisfil we install new deadbolts on doors that have never had one, replace worn units on doors that have, and set the strike so the bolt slides home without lifting or leaning on the door. This page also covers Barclay and Innisfil Heights.
Same fees day or night · Innisfil
Innisfil
Locksmith services · Innisfil
These are the services we bring to doors across Innisfil. Residential work covers lockouts, rekeying, lock replacement, deadbolts, smart locks and older hardware brought back to life. Commercial work covers storefront doors, exit devices, closers, master keys and safes. Vehicle key cutting rounds out the list when it is needed.
Innisfil
Commercial-Grade Lock Replacement, Seized & Jammed Lock Opening, Lock Rekeying, Lost Keys — Same-Visit Rekey…
- Seized & Jammed Lock OpeningIt is the coldest morning of the winter and the key goes halfway into the side door and stops.
- Lost Keys — Same-Visit RekeyYour purse was taken from the back of a chair at a restaurant.
- Lock RekeyingYour roommate moved out last weekend.
- Commercial RekeyingA key turned up in the parking lot with the shop's name on its fob.
- Master Key System DesignThe new wing was built with its own brand of cylinder, so the two-year-old keys from the original building do not open a single…
- Commercial-Grade Lock ReplacementThe kitchen delivery door gets shouldered open more than a hundred times a shift, and lately the latch slips past the strike…
- Spare Car Key DuplicationOne key opens the car, starts the car, and rides in one pocket every day.
- Ignition Lock RepairHalf the key is still in your hand.
- Vehicle Lock RepairYou line the key up with the trunk lock, turn it, and feel nothing catch.
Book your Innisfil locksmith visit
We keep doors in Innisfil working through their whole life. Fit it, tune it, rekey it when people change, upgrade it when the household wants more. Because the same company does each stage, the second visit never starts from scratch: we already know the door, the frame and the finish, and we pick up where the last visit left off.
Nearby Bell Ewart, Big Bay Point, Cedar Harbour, Cookstown, Innisfil Park, Killarney Beach, Leonards Beach, Nantyr Park, Stroud, Alcona, Alderslea, Bear Point, Belle Air Beach, Big Cedar Point, Cedar Mount, Churchill, Crescent Harbour, De Grassi Point, Glenwood Beach, Lefroy, Mooselanka Beach, Peninsular Park, Sandy Cove and Tent City
Shop rules
Sound hardware, straight answers.
- Questions welcomed. Ask about the lock, the method, the parts or the reasoning. A good explanation is part of the service, not a favour.
- Nothing forced that could be finessed. We reach for picks and shims before drills, and we tell you if the lock has left us no gentle option.
- Swept, wiped and working. Metal filings, drywall dust and old screws all leave with us. The lock is tested from both sides and the key handed over.
- Open 24/7, same fees any hour. Ask us what the visit involves.
24 years in business · Reach out and we'll explain the options: (249) 315-0368
Five scenes · open 24/7
How a visit goes
Older houses around here have older doors, and older doors have their own logic. A mortise lock from the 1920s was built to be serviced, not thrown away, and a rim lock on a back porch may simply need cleaning and a new spring.
Step 1 of 5
Call and describe the door
Describe the property, the hardware and what has changed, and the visit starts from what you have seen.
Step 2 of 5
On our way
You tell us what is happening with the door, who has keys and what you would like to be different afterwards. We ask a few questions so we arrive with the right parts.
Step 3 of 5
Questions welcomed
Ask about the lock, the method, the parts or the reasoning. A good explanation is part of the service, not a favour.
Step 4 of 5
Nothing forced that could be finessed
We reach for picks and shims before drills, and we tell you if the lock has left us no gentle option.
Step 5 of 5
Swept, wiped and working
Metal filings, drywall dust and old screws all leave with us. The lock is tested from both sides and the key handed over.
Innisfilinformation
SimcoeOntario
- Town
- Innisfil, Simcoe
- In business
- 24 years
- Hours
- Open 24/7
- Nights, weekends and holidays, same fees
- Phone
- (249) 315-0368
- Visits
- On-site assessment preferred. Request a visit or call.
2021 census: what it means at the door
Every square is one home in a hundred.
- 35 in 100 homes · mixed ages
- 90 in 100 homes · mostly houses
- About 35% of homes in Innisfil were built in 1980 or earlier, according to the 2021 Census.Where homes of different generations sit together, additions and renovations are common. A house may have an original front door and a much newer side entry, and bringing both onto the same key and the same standard is a regular job.
- Single-detached houses make up about 90% of homes in Innisfil (2021 Census).Detached houses collect hardware from every renovation. A locksmith visiting one often finds three keyways, two finishes and one door that never latched right. Sorting all of that into a consistent, working set is a satisfying afternoon's work.
Nearby
Ask us anything about locks
If the cylinder is replaced, can it be keyed to my existing key?
Often, yes. A replacement cylinder in the same keyway can be pinned to the cuts on the key already on your ring, so the front and back doors stay on one key and nothing else in the house changes. If the old keyway is no longer made or the key is badly worn, the new cylinder comes with fresh keys and the other doors can be rekeyed to match in the same visit.
My lock is the homeowner-rekeyable type but the working key is lost. Can it still be reset?
Yes. Those cylinders let an owner change the key with a small learn tool, but only while a working key is in hand. Without one, a design such as Kwikset SmartKey is removed and placed in its own reset fixture, returning it to a blank state; other cylinder types are rekeyed by their own method instead. A new key is then set and the lock goes back on. It is a few extra minutes rather than a replacement.
How many new keys will I get, and can I get more later?
As many as you ask for, cut on site from the fresh pinning and tested in each door they should open; two or three is typical for a household. More can be cut later. When you do, bring one of the locksmith's originals to be copied rather than a copy of a copy, since every generation strays slightly from the intended depths. If any key is a restricted type, additional copies come from the record kept for that system rather than from a hardware store.
What condition does a lock need to be in to be rekeyed?
It needs a plug that rotates without catching, pins that return under their springs, and a face free of heavy corrosion or cracks. Most commercial cylinders in daily use pass easily. Ones that are stiff, gritty or green with salt bloom can sometimes be cleaned and repinned, and the locksmith will say when a replacement for that door is the better value; the rest of the doors are rekeyed regardless.