Sound familiar?Innisfil
- The call
- A roommate moved out on bad terms and says the key was left on the counter. It was not. You have already changed the Wi-Fi password, but the front door still opens for a key that could be anywhere.
Your purse was taken from the back of a chair at a restaurant. The cards can be cancelled by phone tonight, but the house keys were in the side pocket beside a driver's licence that shows exactly where those keys fit.
In plain words
The visit runs in a steady order. On the phone you describe what was lost, which doors it opened and whether you have a way in. At the door the locksmith confirms your connection to the property, then walks it with you listing every cylinder. Each one comes off in turn, is repinned to the new key and refitted. The first key is cut to the new combination and checked in every lock, and the remaining copies are cut from it. Then every key is tried in every door with you watching, the count is agreed, and the new key code is written down for future copies.
Lost Keys — Same-Visit Rekey · Innisfil
How the visit goes
Scene 1
Where the tenant and landlord line falls
Rented and shared buildings add a boundary that the locksmith maps early. A tenant's suite door is theirs to use but a lock change is agreed with the landlord, who receives keys as well. A condominium suite cylinder may sit on the building's master system, so its rekey is planned so the master still works, and the lobby, garage and amenity doors stay with the corporation. A small business rekeying a shop door checks what the lease says about the landlord holding a key. Sorting this out on the doorstep keeps every party informed and lets the work proceed with no surprise phone calls the following week.
Scene 2
Setting a new combination pin by pin
On a conventional pin-tumbler cylinder, with it on the bench, the plug is turned slightly and a follower is slid in behind it so the springs and top pins stay in the housing rather than scattering. The plug comes out and the old bottom pins are tipped away. The new key is cut first, then a pin whose length matches each cut is dropped into the corresponding chamber, checked flush with a gauge, and the loaded plug is guided back under the follower. The plug should turn with a light, even feel and no catch. If it drags on one chamber, that pin is sized again before anything goes back on the door.
Scene 3
Cylinders that turn more sweetly than before
A cylinder that has been apart, cleaned and repinned usually feels better than it did before the key went missing. Old grease, road salt and the grit that collects in a keyway over a decade came out with the plug, and a dry lubricant went in. Keys cut to code seat fully and lift each pin cleanly. If a door had a key that needed a wiggle or a shove, that is often gone. Follow your lock's own maintenance guidance to keep it that way: many cylinders take a puff of graphite or PTFE into the keyway now and then, some a specified liquid lubricant instead; general household oils and sprays collect dust and gum the pins.
In the van
- Key gauge and decoder
- Cylinder retaining-clip and cap tools
- Dry graphite or PTFE lubricant
- Pin tweezers and shims
- Key blanks in common keyways
What shapes the quoteBell Ewart Lock Services
- Number of keys cut
- New keys are cut on site and counted individually. Two for a couple or six for a household with teenagers and a sitter: name the number and the quote reflects it.
- Condition of the cylinders
- A clean, healthy cylinder is repinned as is. One clogged with salt and grit is cleaned first, and a worn or damaged one is replaced rather than repinned, each priced as its own item.
- Homeowner-rekeyable cylinders without a working key
- Resetting a homeowner-rekeyable cylinder when its key is gone uses that system's own reset fixture, where the installed lock supports one, and a few extra minutes per cylinder, which shows as a small line on the quote.
FeesSame any hour
Ask us anything about locks
My lock is the homeowner-rekeyable type but the working key is lost. Can it still be reset?
Yes. Those cylinders let an owner change the key with a small learn tool, but only while a working key is in hand. Without one, a design such as Kwikset SmartKey is removed and placed in its own reset fixture, returning it to a blank state; other cylinder types are rekeyed by their own method instead. A new key is then set and the lock goes back on. It is a few extra minutes rather than a replacement.
Does stamping keys 'do not duplicate' stop copies?
It asks; it does not compel. The stamp is a request that a key-cutting counter may or may not honour, and manufacturers say as much. Real control comes from a restricted keyway, whose blanks are issued only through authorised channels against a key card, or simply from knowing how many keys exist and who holds them. A rekey resets that count to a number you chose.
Does the locksmith need to see the actual lost key, or just look at the lock?
Just the lock, and the door it is fitted to. A rekey works on the cylinder itself: the locksmith opens it, fits a new set of pins matched to a fresh key, and the old key stops working the moment that is done, whether or not it ever turns up again. Knowing roughly how the old key looked, cut on both edges, a chip on the head, a certain brand, can still help identify which cylinders in the house shared that key.
Lockout Services
- Business Lockout ServiceA cook stepped into the alley with the recycling and the rear door swung shut behind him.
- Broken Key ExtractionThe padlock on the shed has been stiff all summer.
- Break-In Damage Lock RepairYou came home to find the front door standing open.
- Seized & Jammed Lock OpeningIt is the coldest morning of the winter and the key goes halfway into the side door and stops.
Innisfilinformation
SimcoeOntario
Lost Keys — Same-Visit Rekey · Bell Ewart, Big Bay Point, Cedar Harbour, Cookstown, Innisfil Park, Killarney Beach, Leonards Beach, Nantyr Park, Stroud, Alcona, Alderslea, Bear Point, Belle Air Beach, Big Cedar Point, Cedar Mount, Churchill, Crescent Harbour, De Grassi Point, Glenwood Beach, Lefroy, Mooselanka Beach, Peninsular Park, Sandy Cove, Tent City
- Town
- Innisfil, Simcoe
- In business
- 24 years
- Hours
- Open 24/7
- Nights, weekends and holidays, same fees
- Phone
- (249) 315-0368
- Visits
- On-site assessment preferred. Request a visit or call.
2021 census: what it means at the door
Every square is one home in a hundred.
- 35 in 100 homes · mixed ages
- 90 in 100 homes · mostly houses
- About 35% of homes in Innisfil were built in 1980 or earlier, according to the 2021 Census.Where homes of different generations sit together, additions and renovations are common. A house may have an original front door and a much newer side entry, and bringing both onto the same key and the same standard is a regular job.
- Single-detached houses make up about 90% of homes in Innisfil (2021 Census).Detached houses collect hardware from every renovation. A locksmith visiting one often finds three keyways, two finishes and one door that never latched right. Sorting all of that into a consistent, working set is a satisfying afternoon's work.
Nearby
On-site assessment
Request a visit.
Your purse was taken from the back of a chair at a restaurant.
(249) 315-0368, open 24/7.