Sound familiar?Tent City
- The call
- Someone smashed the little window beside the door, reached in and turned the thumb-turn. The lock itself is fine, but there is glass on the mat, a hole in the sidelight and a deadbolt anyone can reach.

You came home to find the front door standing open. The deadbolt is still thrown, but the strike plate is dangling from one screw and a fist-sized piece of the jamb is lying on the hall floor.
There are really two jobs inside one call. The first is tonight: make the door close and lock so the household can sleep. Where the door and frame are sound that means a new lockset or cylinder; where the jamb has split it means a repair plate over the break or a board across the opening, always arranged so the door still opens from inside without a key. The second job is the permanent repair, often the same visit: a reinforced strike box, long screws into the stud, a strengthened door edge and a deadbolt with a full throw. Both are quoted separately so you decide what happens when.
Sound familiar?Tent City
Break-In Damage Lock Repair · Tent City

Scene 1
The first minutes are about people, not hardware. The locksmith confirms that the caller has authority over the property: photo identification with the address, a lease, an ownership record or an instruction from the property manager. A break-in is precisely the moment a stranger could ask for a lock to be changed, so the check protects the household. The second question is whether anyone is hurt and whether the intruder is certainly gone; if the police have not yet been called, that call comes before any work, and the door is left as found until they say the scene is released. Only then does the assessment of the opening begin.
Scene 2
The replacement hardware is chosen for the door and for the attack it suffered. A deadbolt with a full one-inch throw, a hardened insert against sawing and a low-profile face that resists a wrench grip is the usual choice, graded to a recognised durability standard rather than the lightest unit on the shelf. It is matched to the existing bore and backset so no new holes weaken the slab, or the preparation is enlarged cleanly where the old hardware was small. The bolt is tested with the door open, then closed, and the strike adjusted until it throws without dragging. Trim and finish are matched to your other doors where you want that.
Scene 3
Wood that has been split and glued back, and screws that have been driven into fresh pilot holes, settle over their first few weeks. Check after a month that the bolt still throws without effort and that the strike and hinge screws are snug, then repeat at each change of season, since humidity swells doors in summer and shrinks them in dry winter air. A door that starts to need a shoulder, or a bolt that begins to catch on the strike lip, is asking for a small adjustment before it becomes a problem. Whatever lubricant and interval that new cylinder's own maker specifies keeps the key turning cleanly.
What shapes the quoteBell Ewart Lock Services
FeesSame any hour
Most forced doors lock again during the visit. If the slab and frame are sound, a new lockset goes in and the strike is reinforced. If the jamb is split, a repair plate or a boxed strike screwed into the stud usually holds it. Boarding is reserved for openings where the frame or the door itself is destroyed, and even then it is fitted so the household can get out from inside without a key.
Many can be repaired. A split along the grain is pressed back together, glued with a two-part wood epoxy and held by a steel repair plate or a boxed strike screwed through it into the stud, so the fasteners reinforce the repair as well as the lock. Missing wood is built up with filler or a fitted piece. A jamb that has pulled off the framing along its length or shattered around the pocket is replaced by a carpenter, with the opening secured until then.
Yes, unless the insurer has already said they are not needed. Insurers generally ask policyholders to retain damaged property until the claim is settled, and a bag holding the twisted cylinder, torn strike and split wood answers an adjuster's questions more clearly than any description. The locksmith hands them over at the end of the visit along with a written note of what was replaced. Photographs of the parts in place, before removal, complete the record.
SimcoeOntario
Break-In Damage Lock Repair · Innisfil, Bell Ewart, Big Bay Point, Cedar Harbour, Cookstown, Innisfil Park, Killarney Beach, Leonards Beach, Nantyr Park, Stroud, Alcona, Alderslea, Bear Point, Belle Air Beach, Big Cedar Point, Cedar Mount, Churchill, Crescent Harbour, De Grassi Point, Glenwood Beach, Lefroy, Mooselanka Beach, Peninsular Park, Sandy Cove
Every square is one home in a hundred.
On-site assessment
You came home to find the front door standing open.
(249) 315-0368, open 24/7.
On-site assessment preferred · (249) 315-0368, open 24/7