Sound familiar?Big Bay Point
- The call
- The kids get home before you do and the spare key has been lost twice this school year. A keypad they can tap, plus a message to your phone when the door opens, would take a daily worry off the list.
Arthritis has made the small house key hard to grip and turn, especially with gloves on in January. Pressing a few buttons, or tapping a fob against the lock, would make coming home in winter far easier.
In plain words
Smart lock installation puts an electronic deadbolt or lever on your door that opens with a code, a phone, a fob or a fingerprint, and, on some models, a conventional key too. The locksmith confirms you control the property, measures the door and its holes, and makes sure the bolt travels freely, because a battery motor has less strength than a hand. The hardware is fitted with a solid strike, the maker's specified batteries go in, and the lock is set up under your own account. You leave with codes working and, on a keyed model, the override key tested and the old key retired.
Smart Lock Installation · Big Bay Point
How the visit goes
Scene 1
What the household wants the lock to do
Before a model is chosen, the locksmith asks how the door will actually be used. Who needs to get in, and how often does that list change? Should the door lock itself after a set time, or stay as it is left? Is a message when it opens useful or annoying? Does anyone want to open it from a phone while away, which brings the network into play, or is a keypad at the door enough? Are there children, a caregiver, a cleaner or a dog walker who need their own codes? Those answers decide between a simple keypad deadbolt, a Bluetooth model, a Wi-Fi model or a lock that joins an existing home hub.
Scene 2
Preparing the door before the lock
Good installations start with corrections, not with the new box. If the bolt was dragging, the locksmith tightens or replaces hinge screws with longer ones that reach the framing, shims a hinge to lift a dropped door, and dresses the strike pocket so the bolt has room to seat fully. Weatherstrip that pushes the door out of square is trimmed or repositioned. If the existing holes are undersized for the new lock, they are enlarged with a hole saw and a jig so they stay centred; if a mortise pocket from an old lock is in the way, it is filled and re-drilled. The door is then closed and the bolt tested by hand before any electronics are unpacked.
Scene 3
The override key has a home
With codes doing the daily work, the mechanical key is easy to forget, and forgetting where it lives is how a dead battery turns into a lockout. On a keyed model, the locksmith hands you the new keys for the rekeyed override cylinder before leaving, and talks through where they should stay: one on a keyring that leaves the house, one with a trusted neighbour or in a combination lockbox fixed somewhere discreet. Try that key in the lock every few months so the cylinder stays free and you know it still turns. If other doors were rekeyed to match, the same key now runs the whole house, and the previous keys can go in the recycling.
In the van
- Adjustable-backset bolt and faceplate
- Door-position sensor magnet
- Reinforced box strike with long screws
- Thick-door extension kit
- Hole saw, spade bit and drilling jig
What shapes the quoteBell Ewart Lock Services
- Supplying the lock yourself
- If you have already bought a lock, the quote covers fitting and setup only, with a note on whether the chosen model suits your door; if the locksmith supplies it, the hardware is listed alongside.
- Pairing a smart deadbolt with a smart lever on the same door
- Some doors get a smart deadbolt only, while others pair it with a smart lever below so both turn from one app and share the same codes. Fitting and programming two devices on one door takes more work than one, confirmed once the door and hardware are seen.
- Door thickness and material
- Thick doors need an extension kit, very thin or glass-panelled doors need particular models, and steel or fibreglass skins take longer to cut cleanly than wood. Each of these shapes both the parts list and the time.
FeesSame any hour
Ask us anything about locks
The house came with a smart lock. Can you make it mine?
Yes, and it is treated as a fresh installation rather than a hand-me-down. The lock is reset to factory settings using the maker's procedure, which wipes codes, schedules and paired phones, then enrolled to an account you create. Anything else that could open it, such as a hub or a voice assistant, gets its own check, because those permissions sit outside the lock. The override cylinder is rekeyed, batteries replaced and firmware updated. If the hardware is worn, replacing it is the cleaner choice.
What happens when the batteries die?
The lock warns you well before that point, with a light or tone at the keypad and, on connected models, a message to your phone. If the warnings are missed, a keyed model's mechanical override still opens the door, while a key-free model instead has two small contacts on the outside where a nine-volt battery gives it enough power to accept a code. The locksmith shows you each route your model offers and where the spare batteries and the key should live.
Will summer heat behind my storm door damage the lock?
It can stress it, and it is one of the first things the locksmith looks at. A full-glass storm door on a south- or west-facing entrance can push the air between the doors well above what electronics are rated for on a hot afternoon. The usual answers are a storm door with a vent or screen, swapping to the screen panel for summer, or a model whose maker rates it for that exposure. With that handled, the lock is fine.
Change or Rekey Locks
- Deadbolt InstallationThe old deadbolt has grown lazy.
- Lock Replacement & UpgradeThe keys the seller handed over came in a sandwich bag: six unlabelled copies for two locks of different makes from different…
- Vintage Mortise Lock ServiceThe key turns freely in the round cylinder on the door, all the way around and back, without the bolt shifting at all.
- Gate & Building Entry LocksBetween the front gate, the side gate and the one behind the shed, there are three different padlocks, three different keys, and…
- Mailbox Lock ReplacementAfter a winter of road spray and salt, the little lock on the mailbox door has gone stiff, then gritty, then almost immovable.
Big Bay Pointinformation
SimcoeOntario
Smart Lock Installation · Innisfil, Bell Ewart, Cedar Harbour, Cookstown, Innisfil Park, Killarney Beach, Leonards Beach, Nantyr Park, Stroud, Alcona, Alderslea, Bear Point, Belle Air Beach, Big Cedar Point, Cedar Mount, Churchill, Crescent Harbour, De Grassi Point, Glenwood Beach, Lefroy, Mooselanka Beach, Peninsular Park, Sandy Cove, Tent City
- Town
- Big Bay Point, Simcoe
- In business
- 24 years
- Hours
- Open 24/7
- Nights, weekends and holidays, same fees
- Phone
- (249) 315-0368
- Visits
- On-site assessment preferred. Request a visit or call.
2021 census: what it means at the door
Every square is one home in a hundred.
- 35 in 100 homes · mixed ages
- 90 in 100 homes · mostly houses
- About 35% of homes in Innisfil were built in 1980 or earlier, according to the 2021 Census.Older frames and newer frames fail in different ways. Settled wood pulls strikes out of line; new framing settles as it dries. A locksmith used to a mixed area recognises which he is looking at and adjusts accordingly.
- Single-detached houses make up about 90% of homes in Innisfil (2021 Census).A detached house gives a locksmith room to work: full access to both sides of every door, hinges and frames included. Repairs and upgrades can be thorough, from the front deadbolt to the gate latch, with nothing off limits.
Nearby
On-site assessment
Request a visit.
Arthritis has made the small house key hard to grip and turn, especially with gloves on in January.
(249) 315-0368, open 24/7.